The molding process of automotive interior parts is divided into feeding, clamping, molding, demolding and mold cleaning.
The molding process of automotive interior parts is divided into feeding, clamping, molding, demolding and mold cleaning. If the product has inserts that need to be sealed during molding, the inserts should be placed in the corresponding position of the mold before feeding it is good. The compression molding process is to heat the sheet material to above the softening temperature, and then quickly move it to the top of the forming mold, fasten the sheet material to the edge of the mold, and shape the sheet material by the pressure of the mold. There is an internal circulating cooling water device in the forming mold. , Close to the outer contour of the mold, after cooling and shaping, the product is water-cut and trimmed to obtain a thin shell-like open product. The process has a greater impact on the quality, performance, and production volume of the product. The process determines how the product is produced, what equipment is used, what mold is developed, what processing method is used, and the production rhythm of the product. Most of the interior parts are compression molded at one time.
Recently, our company has successfully completed the installation and acceptance of two 200-ton servo hydraulic presses for interior trim parts. The equipment is equipped with a mobile platform. The two equipment are 90-degree connected and the top platform is connected. The customer's factory manipulator linkage operation is supported. The PHC material is formed into the corresponding automobile spare tire cover plate, shelf plate, sunroof sun visor and support plate and other components through the mold. Our company specializes in the production of various types of servo hydraulic presses, and has established industry standards in hydraulic presses for interior parts. Welcome all interested companies to visit, Tel: 0510-83394311, Email: cindy@wuxipd.com
